Flowserve 191400 Series Instrukcja Użytkownika Pobierz pdf

Hygiene, Food and Beverage Valves

Series 191400

KMEIM9103-01 06.04

INDEX

1 Using FLOWSERVE valves, actuators and acces-

sories correctly

2 Unpacking

3 Technical data

4 Safety

5 Installation

6 Disassembly and assembly

7 Disassembly

8 Assembly

9 Commissioning

10 Maintenance

1 USING FLOWSERVE VALVES, ACTUATORS AND AC-

CESSORIES CORRECTLY

1.1 Using

The following instructions are designed to assist in

unpacking, installing and performing maintenance as

required on FLOWSERVE products. Product users and

maintenance personnel should thoroughly review this

bulletin prior to installing, operating or performing any

maintenance.

In most cases FLOWSERVE valves, actuators and ac-

cessories are designed for speciﬁc applications (e.g.

with regard to medium, pressure, temperature). For

this reason they should not be used in other applica-

tions without ﬁrst contacting the manufacturer.

1.2 Terms concerning safety

The safety terms DANGER, WARNING, CAUTION and

NOTE are used in these instructions to highlight par-

ticular dangers and/or to provide additional information

on aspects that may not be readily apparent.

DANGER: indicates that death, severe personal injury

and/or substantial property damage will occur if proper

precautions are not taken.

WARNING: indicates that death, severe personal injury

and/or substantial property damage can occur if proper

precautions are not taken.

CAUTION: indicates that minor personal injury and/or

property damage can occur if proper precautions are

not taken.

NOTE: indicates and provides additional technical

information, which may not be very obvious even to

qualiﬁed personnel.

Compliance with other, not particularly emphasised

notes, with regard to transport, assembly, operation

and maintenance and with regard to technical docu-

mentation (e.g. in the operating instruction, product

documentation or on the product itself) is essential,

in order to avoid faults, which in themselves might

directly or indirectly cause severe personal injury or

property damage.

1.3 Protective clothing

FLOWSERVE products are often used in problematic

applications (e.g. extremely high pressures, danger-

ous, toxic or corrosive mediums). In particular valves

with bellows seals point to such applications. When

performing service, inspection or repair operations

always ensure, that the valve and actuator are depres-

surised and that the valve has been cleaned and is free

from harmful substances. In such cases pay particular

attention to personal protection (protective clothing,

gloves, glasses etc.).

1.4 Qualiﬁed personnel

Qualiﬁed personnel are people who, on account of their

training, experience and instruction and their knowl-

edge of relevant standards, speciﬁcations, accident

prevention regulations and operating conditions, have

been authorised by those responsible for the safety of

the plant to perform the necessary work and who can

recognise and avoid possible dangers.

STOP!

1 2 3 4 5 6 7 8

Podsumowanie treści

Strona 1 - Series 191400

1Hygiene, Food and Beverage Valves Series 191400KMEIM9103-01 06.04INDEX 1 Using FLOWSERVE valves, actuators and acces-sories correctly 2 Unpac

Strona 2 - 2 UNPACKING

2STOP!1.5 Installation DANGER: Before installation check the order-no, serial-no. and/or the tag-no. to ensure that the valve/actuator is correct fo

Strona 3 - 128-NS76,1

33 TECHNICAL DATAFig. 1M 10AAFM 38 x 1,5a ↑Valve sizeDim. ADIN 11850Weld endsDim. AISO 2037BS 4825Part 1Weld endsDim. ADIN EN ISO 1127/DIN 2463Reihe

Strona 4

43.1 Application Control Valve 3.2 Pressure rating PN 25 ( depending on body connection)3.3 Temperature range 0 °C to 100 °C 3.4 Valve f

Strona 5

54 SAFETY The valves described in this documentation are de-signed and produced so that they do not present any hazard for the operating and service

Strona 6

65.4.4 Welding ﬁllersFiller match-up table Material to Suitable welding ﬁller be welded 1.4316 1.4430 1.4440 1.4519 1.4301 x

Strona 7

7Figure 29 COMMISSIONING CAUTION: Ensure that no foreign particles are present in the line system 9.1 Idle test Operate valve once by actuating wi

Strona 8

810.1 Inspection FLOWSERVE valves do not require any special serv-ice. However perform a visual check for leakage and proper function between the ma

Więcej dokumentów dla Sprzęt komputerowy Flowserve 191400 Series

Aby wyświetlić dokument Flowserve 191400 Series Instrukcja Użytkownika

Flowserve 191400 Series Instrukcja Użytkownika (8 strony)

Komentarze do niniejszej Instrukcji

Brak uwag

Flowserve 191400 Series Instrukcja Użytkownika

Przeglądaj online lub pobierz Instrukcja Użytkownika dla Sprzęt komputerowy Flowserve 191400 Series. Flowserve 191400 Series User Manual Instrukcja obsługi

Podsumowanie treści

Więcej dokumentów dla Sprzęt komputerowy Flowserve 191400 Series

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Flowserve 191400 Series