Flowserve 2 Series P2 Type Instrukcja Użytkownika Pobierz pdf (Strona 1)

Flow Control Division

Kammer Control Valves

Installation, Operation, Maintenance Instructions

Pneumatic Diaphragm On-Off Actuators

Series 2, Types: P2, P3, P4

1 USING KÄMMER VALVES AND ACTUATORS

CORRECTLY

1.1 General

The following instructions are designed to assist in

unpacking, installing and performing maintenance as

required on Kämmer products. Product users and

maintenance personnel should thoroughly review this

bulletin prior to installing, operating or performing

any maintenance.

DANGER:

In most cases Kämmer valves and actuators

are designed for specific applications (e.g. with regard

to medium, pressure, temperature). For this reason

they should not be used in other applications without

first contacting the manufacturer.

1.2 Terms concerning safety

The safety terms DANGER, WARNING, CAUTION and

NOTE are used in these instructions to highlight

particular dangers and/or to provide additional

information on aspects that may not be readily

apparent.

DANGER:

indicates that death, severe personal injury

and/or substantial property damage will occur if

proper precautions are not taken.

WARNING:

indicates that death, severe personal injury

and/or substantial property damage can occur if

proper precautions are not taken.

CAUTION:

indicates that minor personal injury and/

or property damage can occur if proper precautions

are not taken.

Index

1 Using Kämmer valves and actuators correctly.

2Unpacking

3 Installation

4 Quick check

5 Maintenance

6 Remove and install actuator

7 Reverse actuator action

8 Disassemble and assemble actuator

9 Troubleshooting chart

NOTE:

indicates and provides additional technical

information, which may not be very obvious even to

qualified personnel. Compliance with other, not

particularly emphasised notes, with regard to

transport, assembly, operation and maintenance and

with regard to technical documentation (e.g. in the

operating instruction, product documentation or on

the product itself) is essential, in order to avoid faults,

which in themselves might directly or indirectly cause

severe personal injury or property damage.

1.3 Protective clothing

Kämmer products are often used in problematic

applications (e.g. extremely high pressures, dang-

erous, toxic or corrosive mediums). In particular

valves with bellows seals point to such applications.

When performing service, inspection or repair

operations always ensure, that the valve and actuator

are depressurised and that the valve has been cleaned

and is free from harmful substances. In such cases

pay particular attention to personal protection

(protective clothing, gloves, glasses etc.).

1.4 Qualified personnel

Qualified personnel are people who, on account of

their training, experience and instruction and their

knowledge of relevant standards, specifications,

accident prevention regulations and operating

conditions, have been authorised by those responsible

for the safety of the plant to perform the necessary

work and who can recognise and avoid possible

dangers.

1.5 Installation

DANGER:

Before installation check the order-no,

serial-no. and/or the tag-no. to ensure that the valve/

actuator is correct for the intended application.

Do not insulate extensions that are provided for hot

or cold services.

Pipelines must be correctly aligned to ensure that the

valve is not fitted under tension.

STOP!

KMEIM0001-00 - 8.03

1 2 3 4 5 6 7 8

Podsumowanie treści

Strona 1 - Series 2, Types: P2, P3, P4

1Flow Control DivisionKammer Control ValvesInstallation, Operation, Maintenance InstructionsPneumatic Diaphragm On-Off ActuatorsSeries 2, Types: P2, P

Strona 2 - Flow Control Division

2Flow Control DivisionKammer Control Valves2 UNPACKING2.1 Each delivery includes a packing slip. When unpack-ing, check all delivered valves and acces

Strona 3

3Flow Control DivisionKammer Control Valves4 QUICK CHECKBefore operating, check the valve as follows:4.1 Open and close the valve, and observe the mov

Strona 4

4Flow Control DivisionKammer Control ValvesFig. 1: Series 1 On-Off Actuator, Air-to-OpenService to the actuator is best performed when the actuator is

Strona 5

5Flow Control DivisionKammer Control Valves7.2.3 Remove the upper case half (22).7.2.4 With a suitable press compress the spring set.7.2.5 Secure the

Strona 6 - Fig. 2: Anti-rotation device

6Flow Control DivisionKammer Control Valvesin section 1.1.8.1.2.2 Remove all case retaining screws (20).8.1.2.3 Remove the upper case half (22).8.1.2.

Strona 7 - Fig. 3: NAMUR coupling half

7Flow Control DivisionKammer Control Valves8.3 NAMUR ACCESSORIES(see Fig. 3)8.3.1 Accessories according to NAMUR can be fitted byflanging them to the

Strona 8 - 9 Troubleshooting chart

8Flow Control DivisionKammer Control Valves9 Troubleshooting chartProblem Possible cause Corrective ActionStem pulsates 1. Unstable air supply 2. A