Flowserve PMV Valve Control System Instrukcja Użytkownika Pobierz pdf (Strona 8)

Manual F5

– 8 –

Installing F5-EX on P5/EP5

Installing on an actuator

– Remove front cover, indicator and Allen head screw from the positioner.

– Install drive coupling 4 and secure it with the Allen head screw.

– Remove front covers and indicator from the F5-EX unit.

– Remove screws 3.

– Install F5-EX on P5/EP5, , make sure drive coupling is properly engaged

before tightening screws 5.

– Reinstall and tight screws 3. Connect and calibrate.

– Reinstall front covers and indicator.

– Front cover screws 2 shall be tightened to 7 Nm (5,2 lbf x ft)

– Remove front covers and indicator from the F5-EX unit.

– Remove screws 3 and (5). Reinstall and tight screws 3.

– Install drive shaft into F5-EX, a solid click should be heard when spindle

adapter is properly installed.

– Mount F5-EX on the actuator using the F05 holes and a mounting kit.

– Connect and calibrate, reinstall front covers and indicator.

– Front cover screws 2 shall be tightened to 7 Nm (5,2 lbf x ft).

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

Brak uwag

Flowserve PMV Valve Control System Instrukcja Użytkownika Strona 8