Flowserve B320 Series Limitorque Instrukcja Użytkownika Pobierz pdf (Strona 13)

Limitorque B320 Series FCD LMENIM3201-02 – 01/15

ﬂowserve.com

Lubrication

The B320 bevel gear operators have a sealed gear case, factory-lubricated with grease. No seal

can remain absolutely tight at all times. Therefore, it is not unusual to ﬁnd a very small amount of

weeping around shaft seals — especially during long periods of idleness such as storage. Using

grease minimizes this condition as much as possible. If a small amount is weeping at start-up,

remove it with a clean cloth. Once the equipment is operating on a regular basis, the weeping should

stop.

5.1 Lubrication Inspection

Inspect the B320 bevel gear operators for correct lubrication prior to operating — particularly

following a storage period. We recommend the operators be checked during an overhaul program.

5.2 Factory Lubricant

The B320 series operator gear case is factory-lubricated with EP-0 lithium soap, mineral base grease,

suitable for temperatures from -20˚F (-29˚C) to 225˚F (107˚C).

a CAUTION: Do not mix lubricants of dissimilar bases.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Brak uwag

Flowserve B320 Series Limitorque Instrukcja Użytkownika Strona 13