Flowserve BUSwitch with Foundation Fieldbus Communications P Instrukcja Użytkownika Pobierz pdf (Strona 11)

AXENIM0048-01 (Firmware Rev. Nov. 12 99) (AUTO-48) 11/01 Page 11 of 16

ation, Springville, UT

Flowserve Corporation 1350 South Mountain Springs Parkway Phone: 801 489 2233

Flow Control Division Springville, Utah 84663 Facsimile: 801 489 2228

Automation Business Unit www.flowserve.com Email: [email protected]

Automax Valve Automation Systems

Product S

pecification

Transducer Block Parameters

Rel.

Index

Parameter Factory

Default

Description

1 ST_REV The revision level of the static data associated with the function

block. To support tracking changes in static parameter attributes,

the associated block’s static revision parameter will be

incremented each time a static parameter attribute value is

changed. Also, the associated block’s static revision parameter

may be incremented if a static parameter attribute is written but

the value is not changed.

2 TAG_DESC The user description of the intended application of the block.

3 STRATEGY The strategy field can be used to identify grouping of blocks. This

data is not checked or processed by the block.

4 ALERT_KEY The identification number of the plant unit. This information may

be used in the host for sorting alarms, etc.

5 MODE_BLK Auto The actual, target, permitted, and normal modes of the block.

6 BLOCK_ERR This parameter reflects the error status associated with the

hardware or software components associated with a block. It is a

bit string, so that multiple errors may be shown.

7 UPDATE_EVT This alert is generated by any change to the static data.

8 BLOCK_ALM The block alarm is used for all configuration, hardware, and

connection failure or system problems in the block. The cause of

the alert is entered in the sub-code field. The first alert to become

active will set the Active status in the Status attribute. As soon as

the Unreported status is cleared by the alert reporting task,

another block alert may be reported without clearing the Active

status, if the sub-code has changed.

9 TRANSDUCER_DIREC

TORY

A directory that specifies the number and starting indices of the

transducers in the transducer block.

10 TRANSDUCER_TYPE Identifies the transducer that follows.

11 XD_ERROR One of the error codes defined in section 4.8 of the FF-903

document on the XD_ERROR and Block Alarm sub-codes.

12 COLLECTION_DIREC

TORY

A directory that specifies the number, starting indices, and DD

Item IDs of the data collections in each transducer within a

transducer block.

13 FINAL_VALUE_D The requested valve position and status written by a discrete

Function Block.

14 ACT_FAIL_ACTIN Specifies the final failure position of the actuator as defined in

section 4.6 of the FF-903 document on the Actuator Failure

Actions.

15 ACT_MAN_ID 4607055 The BUSwitch™ manufacturer identification number.

16 ACT_MODEL_NUM The actuator model number.

17 ACT_SN The actuator serial number.

18 VALVE_MAN_ID The valve manufacturer identification number.

19 VALVE_MODEL_NUM The valve model number.

20 VALVE_SN The valve serial number.

21 VALVE_TYPE The type of the valve as defined in section 4.7 of the FF-903

document on the Valve Type.

22 XD_CAL_LOC The location of last calibration.

23 XD_CAL_DATE Date of the last calibration.

24 XD_CAL_WHO Name of the person responsible for last calibration.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Komentarze do niniejszej Instrukcji

Brak uwag

Flowserve BUSwitch with Foundation Fieldbus Communications P Instrukcja Użytkownika Strona 11

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Sprzęt komputerowy Flowserve BUSwitch with Foundation Fieldbus Communications P