Flowserve MX Limitorque Instrukcja Użytkownika Pobierz pdf (Strona 36)

Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08

STEP 1

c

WARNING: Potential to operate while dangerous mechanical parts are exposed during

subassembly removal. To prevent injury, turn off all power sources to actuator before

removing side-mounted and top-mounted handwheel assembly. Power sources may

include main power or control power.

NOTE: Oil removal is not necessary on MX-05, -10, -85, -140, and -150 if actuator is mounted with

declutch lever up.

Drain oil from actuator using the lowest of three

plugs in your application mounting orientation.

Oil Plug Drains

STEP 2

c

WARNING: Potential to operate while dangerous mechanical parts are exposed during

subassembly removal. To prevent injury, turn off all power sources to actuator before

removing declutch assembly. Power sources may include main power or control power.

Using a 5 mm (MX-05 and -10) or 6 mm

(MX-20, -40, -85, -140, and -150) hex key,

remove the two M6 (MX-05 and -10) screws

(#5-12), M8 (MX-20 and -40) or the four M8

(MX-85, -140, and -150) screws that retain the

declutch assembly cover (#5-1) on the actuator

housing.

5-12

5-1

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 163 164

Brak uwag

Flowserve MX Limitorque Instrukcja Użytkownika Strona 36