Flowserve MX Limitorque Instrukcja Użytkownika Pobierz pdf (Strona 76)

Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08

4.11.1 Removal

First Remove

1. Remove actuator from mounting adapter.

2. Drain oil.

3. Remove thrust base (subassembly #10) - if fitted.

4. Remove motor (subassembly #4). (See Section 4.1.1.)

5. Remove worm shaft (subassembly #3). (See Section 4.10.1.)

6. Remove base plate (subassembly #11). (See Section 4.9.1.)

STEP 1

c

WARNING: Potential to operate while dangerous mechanical parts are exposed during

subassembly removal. To prevent injury, turn off all power sources to actuator before

removing drive sleeve assembly. Power sources may include main power or control

power.

Once all other subassemblies are removed,

pull out the drive sleeve assembly (#2) until

the lower bearing (#2-4) is released from

the actuator housing. Remove drive sleeve

assembly from actuator.

2-4

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 163 164

Brak uwag

Flowserve MX Limitorque Instrukcja Użytkownika Strona 76